Biochar Production
Biochar is a carbon-rich solid material produced by the pyrolysis of biomass. This involves heating the feedstock in the absence of oxygen,
which results in the formation of a high-carbon material that can potentially be used in a wide variety of applications, including: as a
soil amendment,
a component of biobased materials, and in pollution remediation.
Biochar can be made from a variety of feedstocks, including wood, agricultural residues, and municipal solid waste.
There are two key considerations when producing biochar from biomass:
1. Biochar Yield - Defined as the percentage by mass of the original biomass that ends up as biochar.
2. Biochar Quality - A wide-encompassing term that considers how suitable the physical and chemical properties of the biochar are for the desired end-use.
Biochar can be made from a variety of feedstocks, including wood, agricultural residues, and municipal solid waste.
There are two key considerations when producing biochar from biomass:
1. Biochar Yield - Defined as the percentage by mass of the original biomass that ends up as biochar.
2. Biochar Quality - A wide-encompassing term that considers how suitable the physical and chemical properties of the biochar are for the desired end-use.
Both of these parameters are affected by the conditions under which the feedstock is pyrolysed. These conditions include temperature, heating rate, and
residence time. For example, high temperatures will lead to lower yields of biochar, as more of the biomass becomes volatile at higher temperatures,
but can also result in the formation of a biochar of higher quality for certain applications (for example those that require a
material of a higher carbon content).
The type of feedstock used for biochar production also greatly influences the yield and quality of biochar. Click here to read more about the compositional components of feedstocks that affect biomass pyrolysis.
The type of feedstock used for biochar production also greatly influences the yield and quality of biochar. Click here to read more about the compositional components of feedstocks that affect biomass pyrolysis.
Screening Feedstocks and Pyrolysis Conditions
At Celignis we have equipment for the lab-scale production of biochar, under slow pyrolysis, from a wide variety of biomass
feedstocks.
This equipment allows us to employ a wide range of pyrolysis conditions (e.g. temperature, residence time, and heating rate etc.). We can use your chosen
pyrolysis conditions or we can suggest, based on our understanding and analysis of the starting feedstock,
appropriate conditions for the production of biochar of the desired specifications. We often find it very useful to firstly undertake a
thermogravimetric analysis (TGA) of the feedstock in order to inform our selection of suitable pyrolysis conditions.
If you are looking to produce and compare biochars from a variety of different feedstocks
then there are two possible approaches we can follow. In one
approach we can pyrolyse all samples using the same pyrolysis conditions, so that direct comparisons can be made between feedstocks,
or we use different conditions
for each feedstock, based on our analytical and/or TGA data of the samples.
Ideally, each feedstock should be processed using both approaches so that biochars between samples can be compared but also the assumed optimal biochar from each sample can also be produced.
Ideally, each feedstock should be processed using both approaches so that biochars between samples can be compared but also the assumed optimal biochar from each sample can also be produced.
If your focus is instead on understanding in detail how a specific feedstock behaves during slow-pyrolysis and on
optimising the biochar produced for your desired
market applications than we can formulate a Design of Experiments (DoE) to study the effects of varying process parameters on
biochar yield and quality. Our DoE experts
have extensive experience in forumlating an experiment plan that covers all the important parameters, and their ranges, whilst also reducing the
number of experiments
needed. The outputs of these experiments can then, if needed, inform a subsequent smaller subset of experiments to narrow-down the final chosen value for
each parameter.
Undertaking Feedstock Pre-treatments and Strategies to Improve Pyrolysis
The Celignis team can undertake feedstock pre-treatment experiments that may help in improving biochar yields and/or quality.
These may include washing or soaking the biochar samples in water or other solvents, which can help remove any contaminants or impurities
that may, for example, contribute to the formation of undesirable polycyclic aromatic hydrocarbons (PAHs) during pyrolysis.
We can also potentially explore the use of certain additives during the pyrolysis process (e.g. potassium hydroxide) that may help to reduce the formation of other undersirable side-products.
We can also potentially explore the use of certain additives during the pyrolysis process (e.g. potassium hydroxide) that may help to reduce the formation of other undersirable side-products.
Testing the Biochar According to Specified End-Use Requirements
We have a wide array of analysis packages to assess the quality of the biochar produced. Relevant analyses and services related to several end-use applications are
listed and linked-to below:
- Soil amendment and plant growth trials.
- Combustion.
- Carbon sequestration.
- Biobased materials.
- Pollution remediation.
- Surface area and pore-size distrubtion.
- Thermogravimetric analysis of biochar for determining thermal stability.
Approaches to Improve Biochar Quality Post-Pyrolysis
We can also work on experiments to upgrade (e.g. activate and/or functionalise) the produced biochar to potentially increase its value and suitability for your
desired end-use applications.
Click here to read more about our services for the upgrading of biochar.
Click here to read more about our services for the upgrading of biochar.
Feel free to get in touch with us if you have any questions about
our services for the production and evaluation of biochar. Relevant members of the
Celignis biochar team
will be happy to assist. Those team members with the most experience with undertaking these experiments and interpreting the resulting data are listed below.
Dan Hayes
Celignis CEO And Founder
PhD (Analytical Chemistry)
Dreamer and achiever. Took Celignis from a concept in a research project to being the bioeconomy's premier provider of analytical and bioprocessing expertise.
Global Recognition as Biomass and Biochar Experts
Celignis provides valued services to over 1000 clients. We understand how the focus of biochar projects
can differ between countries and have advised a global network of clients. We also have customs-exemptions for samples sent
to us allowing us to quickly get to work no matter where our clients are based.
Feedstock Evaluation
Our analysis packages can screen biochar feedstocks. We can estimate biochar yield and quality
using feedstock chemical composition and can estimate biochar composition using the ultimate and major/minor elements analyses of the feedstock.
With TGA analysis we can also monitor feedstock behaviour under pyrolysis conditions.
Biochar Analysis
We have an extensive array of analysis packages to evaluate the suitability of biochar for a range of applications. These analyses cover
properties relevant to combustion, soil amendment, feed, and biomaterials. Our reports compare the results against internationally-recognised limits for using the biochar in specific end-products.
Biochar Combustion Properties
Biochar can be a superior fuel versus virgin biomass due to its greater carbon content and energy density.
We offer a wide array of analysis packages to fully evaluate biochar as a fuel. For example, we can determine both organic and inorganic carbon and can
monitor the behaviour of the biochar ash over wide temperature ranges.
Soil Amendment & Plant Growth Trials
We can test biochar for several properties (e.g. water holding capacity, electrical conductivity etc.)
relevant to its use in soil amendment. We can also grow plants in biochar-amended soils and assess the impacts of this approach on germination, plant growth, plant
health, and soil biology.
Analysis of PAHs in Biochar
Polycyclic aromatic hydrocarbons can be formed during the pyrolysis of biomass and accumulate in biochar,
leading to potential risks to the environment. We can accurately quantify a range of different PAHs and determine if their concentrations
exceed regulatory limits. We can also develop strategies to reduce the amount of PAHs in biochar.
Surface Area and Porosity of Biochar
The suitable markets for a biochar are often greatly dependent on its surface area and pore size-distrubtion.
We provide detailed reports on biochar surface area and porosity and can provide guidance on the implications of the results. We can also work on
strategies to increase the surface area and modify the pore-size distribution of biochar.
Thermogravimetric Analysis of Biochar
TGA is a powerful analytical technique for the study of biochars because it allows us to
examine the thermal stability of the material as a function of temperature. The thermal stability of biochars is an important factor to
consider when evaluating their potential use as a soil amendment or for carbon sequestration.
Biochar Upgrading
There are several different methods (covering physical, chemical and biologial routes) by which we can upgrade your
biochar in order to increase its value and make it more suitable for the desired market applications. We are able to fully characterise the changes
in physicochemical properties associated with upgrading.
Biochar for Carbon Sequestration
Biochar's efficacy as a means for sequestering carbon depends on a range of factors (e.g. feedstock
and pyrolysis conditions). We can undertake a range of analytical tests to help you determine the stability of your biochar's carbon. We can also
suggest alternative approaches to improve carbon sequestration potential.
Technoeconomic Analyses of Biochar Projects
Our TEA experts work with you to evaluate the economic prospects of your biochar facility,
considering various scale, technology, and feedstock options. We apply accurate costing models to determine CAPEX/OPEX of simulated and pilot
scale processes which are then used to determine key economic indicators (e.g. IRR, NPV).
Research Project Collaborations
Celignis is active in a number of important research projects focused on biomass valorisation. Biochar
is a key component in some of these ongoing projects as well as in several prior projects. We are open to participating in future collaborative
research projects where our extensive infrastructure and expertise in biochar can be leveraged.
See our pitches for the 2024 topics.
Special Offer
Analysis Packages
P8 : Lignin Content
Lignin (Klason), Lignin (Acid Soluble), Acid Insoluble Residue, Ash (Acid Insoluble),
Lignin (Klason), Lignin (Acid Soluble), Acid Insoluble Residue, Ash (Acid Insoluble),
P19 : Deluxe Lignocellulose Package
As P10 plus protein-corrected lignin, water-soluble sugars, uronic acids, acetyl content and starch.
As P10 plus protein-corrected lignin, water-soluble sugars, uronic acids, acetyl content and starch.
P15 : Uronic Acids
Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, 4-O-Methyl-D-Glucuronic Acid, Iduronic Acid,
Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, 4-O-Methyl-D-Glucuronic Acid, Iduronic Acid,
P121 : Evaluation of Biomass for Enzymatic Digestibility
Total Sugars in Enzyme Hydrolysate, Glucose in Enzyme Hydrolysate, Xylose in Enzyme Hydrolysate, Arabinose in Enzyme Hydrolysate, Mannose in Enzyme Hydrolysate, Galactose in Enzyme Hydrolysate, Rhamnose in Enzyme Hydrolysate, Cellobiose in Enzyme Hydrolysate, Enzymatic Hydrolysis Kinetics, Cellulose Conversion Yield, Xylan Conversion Yield, Combined Sugar Yield, Cellulose Conversion Rate, Xylan Conversion Rate,
Total Sugars in Enzyme Hydrolysate, Glucose in Enzyme Hydrolysate, Xylose in Enzyme Hydrolysate, Arabinose in Enzyme Hydrolysate, Mannose in Enzyme Hydrolysate, Galactose in Enzyme Hydrolysate, Rhamnose in Enzyme Hydrolysate, Cellobiose in Enzyme Hydrolysate, Enzymatic Hydrolysis Kinetics, Cellulose Conversion Yield, Xylan Conversion Yield, Combined Sugar Yield, Cellulose Conversion Rate, Xylan Conversion Rate,
P122 : Evaluation of Pre-Treatment on Enzymatic Digestibility
As P121 plus comparisons with data from the non-pretreated original sample, including: Increase in Cellulose Accessibility after Pre-Treatment, Percent Increase in Cellulose Conversion Efficiency, Percent Increase in Cellulose Conversion Rate.
As P121 plus comparisons with data from the non-pretreated original sample, including: Increase in Cellulose Accessibility after Pre-Treatment, Percent Increase in Cellulose Conversion Efficiency, Percent Increase in Cellulose Conversion Rate.
P123 : Composition of Residue from Enzymatic Hydrolysis
As P9 but on the solid residue after enzymatic hydrolysis.
As P9 but on the solid residue after enzymatic hydrolysis.
P124 : Fermentation Inhibitors in Enzymatic Hydrolysate
Formic Acid, Acetic Acid, Levulinic Acid, Furfural, Hydroxymethylfurfural,
Formic Acid, Acetic Acid, Levulinic Acid, Furfural, Hydroxymethylfurfural,
P125 : Cellulase Saccharification Efficiency
Includes all hydrolysate sugars and kinetics in P121 and: Cellulose Conversion Yield, Cellulose Conversion Rate
Includes all hydrolysate sugars and kinetics in P121 and: Cellulose Conversion Yield, Cellulose Conversion Rate
P126 : Xylanase Saccharification Efficiency
Includes all hydrolysate sugars and kinetics in P121 and: Xylan Conversion Yield, Xylan Conversion Rate
Includes all hydrolysate sugars and kinetics in P121 and: Xylan Conversion Yield, Xylan Conversion Rate
P127 : Amylase Saccharification Efficiency
Total Sugars in Enzyme Hydrolysate, Glucose in Enzyme Hydrolysate, Maltose in Enzyme Hydrolysate, a-Amylase Hydrolysis Kinetics, Glucoamylase Hydrolysis Kinetics,
Total Sugars in Enzyme Hydrolysate, Glucose in Enzyme Hydrolysate, Maltose in Enzyme Hydrolysate, a-Amylase Hydrolysis Kinetics, Glucoamylase Hydrolysis Kinetics,
P12 : Sugars in Solvent Extract
Glucose, Xylose, Fructose, Sucrose, Mannose, Arabinose, Galactose, Rhamnose, Xylitol, Sorbitol, Trehalose, Mannitol, Arabinitol, Glycerol, Raffinose,
Glucose, Xylose, Fructose, Sucrose, Mannose, Arabinose, Galactose, Rhamnose, Xylitol, Sorbitol, Trehalose, Mannitol, Arabinitol, Glycerol, Raffinose,
P22 : Organic Acids and Furans
Levulinic Acid, Formic Acid, Hydroxymethylfurfural, Furfural, Acetic Acid, gamma-Valerolactone,
Levulinic Acid, Formic Acid, Hydroxymethylfurfural, Furfural, Acetic Acid, gamma-Valerolactone,
P24 : Dimers and Trimers from Hemicellulose Hydrolysis
Xylobiose, Xylotriose, Arabinobiose, Arabinotriose,
Xylobiose, Xylotriose, Arabinobiose, Arabinotriose,
P29 : Oligomers from Starch Hydrolysis
Maltose, Maltotriose, Maltotetraose, Maltopentaose, Maltohexaose, Maltoheptaose, Maltooctaose,
Maltose, Maltotriose, Maltotetraose, Maltopentaose, Maltohexaose, Maltoheptaose, Maltooctaose,
P15 : Uronic Acids
Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, 4-O-Methyl-D-Glucuronic Acid, Iduronic Acid,
Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, 4-O-Methyl-D-Glucuronic Acid, Iduronic Acid,
P75 : Seaweed Phytohormones
Gibberellic Acid, Indole-3-acetic acid, Indole-2-acetic acid, Indole-3-propionic acid, Indole-3-butyric acid, 6-Benzylaminopurine, Kinetin riboside, Abscisic acid, Salicylic acid,
Gibberellic Acid, Indole-3-acetic acid, Indole-2-acetic acid, Indole-3-propionic acid, Indole-3-butyric acid, 6-Benzylaminopurine, Kinetin riboside, Abscisic acid, Salicylic acid,
P76 : Seaweed Vitamins (Fat-Soluble)
beta-Carotene, Ergocalciferol (Vitamin D2), Alpha-tocopherol (vitamin E), Phylloquinone (Vitamin K1),
beta-Carotene, Ergocalciferol (Vitamin D2), Alpha-tocopherol (vitamin E), Phylloquinone (Vitamin K1),
P77 : Seaweed Vitamins (Water-Soluble)
Thiamine (Vitamin B1), Riboflavin (Vitamin B2), Niacin (Vitamin B3), Niacinamide (vitamin B3), Pantothenic Acid (Vitamin B5), Pyridoxine (Vitamin B6), Folate (Vitamin B9), Cobalamin (Vitamin B12), Ascorbic Acid (Vitamin C),
Thiamine (Vitamin B1), Riboflavin (Vitamin B2), Niacin (Vitamin B3), Niacinamide (vitamin B3), Pantothenic Acid (Vitamin B5), Pyridoxine (Vitamin B6), Folate (Vitamin B9), Cobalamin (Vitamin B12), Ascorbic Acid (Vitamin C),
P71 : Seaweed Carbohydrates
Fucose, Mannitol, Glucose, Xylose, Mannose, Arabinose, Galactose, Rhamnose, Total Sugars, Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, Iduronic Acid,
Fucose, Mannitol, Glucose, Xylose, Mannose, Arabinose, Galactose, Rhamnose, Total Sugars, Glucuronic Acid, Galacturonic Acid, Mannuronic Acid, Guluronic Acid, Iduronic Acid,
P72 : Seaweed Amino Acids
Alanine, Arginine, Aspartic Acid, Asparagine, Cystine, Glutamic Acid, Glutamine, Glycine, Histidine, Isoleucine, Leucine, Lysine, Methionine, Phenylalanine, Proline, Serine, Threonine, Tryptophan, Tyrosine, Valine,
Alanine, Arginine, Aspartic Acid, Asparagine, Cystine, Glutamic Acid, Glutamine, Glycine, Histidine, Isoleucine, Leucine, Lysine, Methionine, Phenylalanine, Proline, Serine, Threonine, Tryptophan, Tyrosine, Valine,
P36 : Major Elements
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
P73 : Seaweed Lipids as Fatty Acids
Arachidic Acid, Behenic Acid, Decanoic Acid, Erucic Acid, Lauric Acid, Linoleic Acid, Linolenic Acid, Myristic Acid, Caprylic Acid, Oleic Acid, Palmitic Acid, Palmitoleic Acid, Stearic Acid, Lignoceric Acid,
Arachidic Acid, Behenic Acid, Decanoic Acid, Erucic Acid, Lauric Acid, Linoleic Acid, Linolenic Acid, Myristic Acid, Caprylic Acid, Oleic Acid, Palmitic Acid, Palmitoleic Acid, Stearic Acid, Lignoceric Acid,
P74 : Pigments in Seaweed
Fucoxanthin, Astaxanthin, Chlorophyll-c, Chlorophyll-a, Chlorophyll-b, Lutein, beta-Carotene, Neoxanthin, Antheraxanthin, Violaxanthin,
Fucoxanthin, Astaxanthin, Chlorophyll-c, Chlorophyll-a, Chlorophyll-b, Lutein, beta-Carotene, Neoxanthin, Antheraxanthin, Violaxanthin,
P75 : Seaweed Phytohormones
Gibberellic Acid, Indole-3-acetic acid, Indole-2-acetic acid, Indole-3-propionic acid, Indole-3-butyric acid, 6-Benzylaminopurine, Kinetin riboside, Abscisic acid, Salicylic acid,
Gibberellic Acid, Indole-3-acetic acid, Indole-2-acetic acid, Indole-3-propionic acid, Indole-3-butyric acid, 6-Benzylaminopurine, Kinetin riboside, Abscisic acid, Salicylic acid,
P76 : Seaweed Vitamins (Fat-Soluble)
beta-Carotene, Ergocalciferol (Vitamin D2), Alpha-tocopherol (vitamin E), Phylloquinone (Vitamin K1),
beta-Carotene, Ergocalciferol (Vitamin D2), Alpha-tocopherol (vitamin E), Phylloquinone (Vitamin K1),
P77 : Seaweed Vitamins (Water-Soluble)
Thiamine (Vitamin B1), Riboflavin (Vitamin B2), Niacin (Vitamin B3), Niacinamide (vitamin B3), Pantothenic Acid (Vitamin B5), Pyridoxine (Vitamin B6), Folate (Vitamin B9), Cobalamin (Vitamin B12), Ascorbic Acid (Vitamin C),
Thiamine (Vitamin B1), Riboflavin (Vitamin B2), Niacin (Vitamin B3), Niacinamide (vitamin B3), Pantothenic Acid (Vitamin B5), Pyridoxine (Vitamin B6), Folate (Vitamin B9), Cobalamin (Vitamin B12), Ascorbic Acid (Vitamin C),
P150 : Plant Pigments
Chlorophyll-a, Chlorophyll-b, Lutein, beta-Carotene, Neoxanthin, Astaxanthin, Zeaxanthin, Antheraxanthin, Violaxanthin,
Chlorophyll-a, Chlorophyll-b, Lutein, beta-Carotene, Neoxanthin, Astaxanthin, Zeaxanthin, Antheraxanthin, Violaxanthin,
P81 : Biomethane Potential - 14 Days
Biomethane Potential (BMP), Total Biogas Volume, Total Solids, Volatile Solids, pH, Biogas Methane Content, Biogas Carbon Dioxide Content, Biogas Oxygen Content, Biogas Hydrogen Sulphide Content, Biogas Ammonia Content,
Biomethane Potential (BMP), Total Biogas Volume, Total Solids, Volatile Solids, pH, Biogas Methane Content, Biogas Carbon Dioxide Content, Biogas Oxygen Content, Biogas Hydrogen Sulphide Content, Biogas Ammonia Content,
P93 : Feedstock Chemical and Biological Analysis
Total Solids, Volatile Solids, pH, Chemical Oxygen Demand (COD),
Total Solids, Volatile Solids, pH, Chemical Oxygen Demand (COD),
P95 : Residual Biogas Potential - 14 Days
Residual Biogas Potential (RBP), Total Biogas Volume, Total Solids, Volatile Solids, pH, Biogas Methane Content, Biogas Carbon Dioxide Content, Biogas Oxygen Content, Biogas Hydrogen Sulphide Content, Biogas Ammonia Content,
Residual Biogas Potential (RBP), Total Biogas Volume, Total Solids, Volatile Solids, pH, Biogas Methane Content, Biogas Carbon Dioxide Content, Biogas Oxygen Content, Biogas Hydrogen Sulphide Content, Biogas Ammonia Content,
P222 : Volatile Fatty Acids (VFAs) Speciation
Acetic Acid, Lactic Acid, Propionic Acid, Butyric Acid, Isobutyric Acid, Valeric Acid, Isovaleric Acid,
Acetic Acid, Lactic Acid, Propionic Acid, Butyric Acid, Isobutyric Acid, Valeric Acid, Isovaleric Acid,
P61 : Sugars in Bio-Oil Water Extract
Levoglucosan, Cellobiosan, Mannosan, Galactosan, Glucose, Xylose, Mannose, Arabinose, Galactose, Rhamnose, Fucose, Sucrose, Cellobiose, Total Sugars,
Levoglucosan, Cellobiosan, Mannosan, Galactosan, Glucose, Xylose, Mannose, Arabinose, Galactose, Rhamnose, Fucose, Sucrose, Cellobiose, Total Sugars,
P63 : Semi-Volatile Oxygenated Components in Bio-Oil
31 constituents including Phenol, Furfural, Syringol, and Vanillin
31 constituents including Phenol, Furfural, Syringol, and Vanillin
P360 : Specific Surface Area (5-Point BET)
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (5 Point Using Nitrogen),
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (5 Point Using Nitrogen),
P364 : Pore-Size Distribution
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (20 Point Using Nitrogen), Pore Volume (Using Nitrogen), Pore Size Distribution (Using Nitrogen), Average Pore Width (Using Nitrogen),
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (20 Point Using Nitrogen), Pore Volume (Using Nitrogen), Pore Size Distribution (Using Nitrogen), Average Pore Width (Using Nitrogen),
P366 : Pore Size Distribution Deluxe
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (40 Point Using Nitrogen), Pore Volume (Using Nitrogen), Pore Size Distribution (Using Nitrogen), Average Pore Width (Using Nitrogen),
Specific Surface Area (Nitrogen Gas Adsorption), BET Isotherm (40 Point Using Nitrogen), Pore Volume (Using Nitrogen), Pore Size Distribution (Using Nitrogen), Average Pore Width (Using Nitrogen),
P34 : Calorific Value and Elements
Gross Calorific Value, Net Calorific Value, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen,
Gross Calorific Value, Net Calorific Value, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen,
P36 : Major Elements
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
P37 : Minor Elements
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
P42 : Ash Melting Behaviour (Reducing Conditions)
Ash Shrinkage Starting Temperature (Reducing), Ash Deformation Temperature (Reducing), Ash Hemisphere Temperature (Reducing), Ash Flow Temperature (Reducing),
Ash Shrinkage Starting Temperature (Reducing), Ash Deformation Temperature (Reducing), Ash Hemisphere Temperature (Reducing), Ash Flow Temperature (Reducing),
P393 : Biochar Thermal Properties Deluxe
Moisture, Ash Content (815C), Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen, Chlorine, Volatile Matter, Fixed Carbon, Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium, Gross Calorific Value, Net Calorific Value, Ash Shrinkage Starting Temperature (Reducing), Ash Deformation Temperature (Reducing), Ash Hemisphere Temperature (Reducing), Ash Flow Temperature (Reducing),
Moisture, Ash Content (815C), Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen, Chlorine, Volatile Matter, Fixed Carbon, Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium, Gross Calorific Value, Net Calorific Value, Ash Shrinkage Starting Temperature (Reducing), Ash Deformation Temperature (Reducing), Ash Hemisphere Temperature (Reducing), Ash Flow Temperature (Reducing),
P394 : Biochar Thermal Properties Ultimate
As P393 plus inorganic carbon, organic carbon, TGA (under nitrogen and air), and inherent moisture
As P393 plus inorganic carbon, organic carbon, TGA (under nitrogen and air), and inherent moisture
P36 : Major Elements
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
P37 : Minor Elements
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
P384 : Biochar Polycyclic Aromatic Hydrocarbons (PAH)
Acenaphthene, Acenaphthylene, Anthracene, Benz[a]anthracene, Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Benzo[a]pyrene, Chrysene, Dibenz[a,h]anthracene, Fluoranthene, Fluorene, Indeno[1,2,3-cd]pyrene, 1-Methylnaphthalene, 2-Methylnaphthalene, Naphthalene, Phenanthrene, Pyrene,
Acenaphthene, Acenaphthylene, Anthracene, Benz[a]anthracene, Benzo[b]fluoranthene, Benzo[k]fluoranthene, Benzo[ghi]perylene, Benzo[a]pyrene, Chrysene, Dibenz[a,h]anthracene, Fluoranthene, Fluorene, Indeno[1,2,3-cd]pyrene, 1-Methylnaphthalene, 2-Methylnaphthalene, Naphthalene, Phenanthrene, Pyrene,
P388 : Biochar Plant Growth Trials
Time to Germination, Mean Shoot Length (Week 1), Mean Shoot Length (Week 2), Mean Shoot Length (Week 3), Mean Shoot Length (Week 4), Shoot Weight (Week 4), Mean Root Length (Week 4), Root Weight (Week 4),
Time to Germination, Mean Shoot Length (Week 1), Mean Shoot Length (Week 2), Mean Shoot Length (Week 3), Mean Shoot Length (Week 4), Shoot Weight (Week 4), Mean Root Length (Week 4), Root Weight (Week 4),
P397 : Biochar Soil Amendment Ultimate
As Deluxe package plus P383, SEM Imaging (P387) and Plant Growth Trials (P388)
As Deluxe package plus P383, SEM Imaging (P387) and Plant Growth Trials (P388)
P399 : Biochar Complete Evaluation Package
Includes everything from P391 (Physical Properties Ultimate), P394 (Thermal Properties Ultimate), and P397 (Soil Amendment Ultimate)
Includes everything from P391 (Physical Properties Ultimate), P394 (Thermal Properties Ultimate), and P397 (Soil Amendment Ultimate)
P34 : Calorific Value and Elements
Gross Calorific Value, Net Calorific Value, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen,
Gross Calorific Value, Net Calorific Value, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen,
P36 : Major Elements
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
Aluminium, Calcium, Iron, Magnesium, Phosphorus, Potassium, Silicon, Sodium, Titanium,
P37 : Minor Elements
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
Antimony, Arsenic, Cadmium, Chromium, Cobalt, Copper, Lead, Manganese, Mercury, Molybdenum, Nickel, Vanadium, Zinc,
P40 : Combustion Package
Volatile Matter, Fixed Carbon, Moisture, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen, Gross Calorific Value, Net Calorific Value, Chlorine,
Volatile Matter, Fixed Carbon, Moisture, Ash, Carbon, Hydrogen, Nitrogen, Sulphur, Oxygen, Gross Calorific Value, Net Calorific Value, Chlorine,
P41 : Ash Melting Behaviour (Oxidising Conditions)
Ash Shrinkage Starting Temperature (Oxidising), Ash Deformation Temperature (Oxidising), Ash Hemisphere Temperature (Oxidising), Ash Flow Temperature (Oxidising),
Ash Shrinkage Starting Temperature (Oxidising), Ash Deformation Temperature (Oxidising), Ash Hemisphere Temperature (Oxidising), Ash Flow Temperature (Oxidising),
News
Jan 24th 2024
€1.5m Funding Success in CBE-JU
Celignis is a Partner in 3 Successful Proposals for EU Funding
We are pleased to announce that three of the proposals involving Celignis, submitted to the CBE-JU programme for funding collaborative biomass research in Europe, were successful. These projects will provide an additional funding of €1.5m to Celignis and build on our achievements in other CBE and EU projects. In particular, the projects are all at enhanced TRLs (6/7) and will use our existing Celignis Bioprocess infrastructure and will also fund further development of our bioprocessing capacities and the Bioprocess Development Services we offer our clients.
Details on the funded projects are provided below:
BIONEER - This project was funded under CBE-JU topic IA-06 and focuses on the TRL 6/7 production of biobased platform chemicals. Celignis's activities in the project focus on scaling up the work undertaken in our ongoing
Read...
Jan 23rd 2024
Celignis to Exhibit and Present at Major Biochar Event
The 2024 North American Biochar Conference will take place in Sacramento, California, on Feb 12-15
On Feb 12-15 we'll be exhibiting at the 2024 North American Biochar Conference, taking place at the SAFE Credit Union Convention Centre in Sacramento, California.
We're looking forward to interacting with the 1000+ expected attendees, outlining our extensive range of analytical and application testing services for biochar.
Celignis CIO Lalitha Gottumukkala will also be a member of the expert panel focused on developing improved laboratory methods for biochar characterisation.
Click here to register for the event.
Read...
Jan 22nd 2024
Celignis Attending BIC Event on Feb 8
This Networking Event Will Involve Discussions on Collaborations for Proposals to the 2024 CBE-JU Topics
The Circular Bioeconomy Europe Joint Undertaking (CBE-JU) is an organisation that funds biomass research in Europe at various Technology Readiness Levels (TRLs). Since 2016 Celignis has been an active participant in a number of projects funded by the CBE-JU.
The Biobased Industries Consortium (BIC) is the steering committee that helps to steer the focus of research for the CBE-JU programme. In 2023 Celignis joined the BIC as a Full Industry Member and participated in several proposals submitted for different research topics in the CBE-JU's 2023 Work Programme.
On Feb 8th Celignis's Dan Hayes, Lalitha Gottumukkala, and Oscar Bedzo will be attending a BIC networking event in Brussels where we will discuss potential collaborations in the research programme topics recently announced for 2024.
Read...
Jan 19th 2024
We're Hiring - Business Administration & Client Relationship Manager
This position will involve working closely with senior management, fostering existing and new client relationships.
Situated in Limerick, Ireland, Celignis currently operates at two centres, Celignis Analytical and Celignis Bioprocess, actively engaging in a variety of private and public bioeconomy projects. As we continue to expand, we're looking to strengthen our team of 14 with a Business Administration and Client Relationship Manager who can bring a blend of enthusiasm and expertise.
This position will involve working closely with senior management, fostering existing and new client relationships, and ensuring successful delivery of our services, playing a key role in our ongoing growth and success.
Click here for more details about the position.
Read...
Apr 30th 2023
Celignis to Sponsor and Present at Major Biochar Event
The event takes place on May 3rd at Carrick-on-Shannon
We are pleased to announce that, on May 3rd, Celignis will be presenting and exhibiting at the National Biochar and Carbon Products Conference 2023, which is taking place in Carrick-on-Shannon in County Leitrm, Ireland.
This conference is being organised under the auspices of the Interreg Northwest Europe-funded THREE C Project, entitled 'Creating and sustaining Charcoal value chains to promote a Circular Carbon economy in NWE Europe'.
The conference will highlight both Irish stakeholders who are currently working in the biochar and carbon products sector, but also partners from the THREE C project (covering Netherlands, Luxembourg, Germany, Belgium, France and Wales, as well as Ireland) who have interesting stories and products to share.
Read...